›

Downgrading TVPad 4 to 5.054

24567…10

Comments

  • cheuk5cheuk5 Senior Member
    是的，你如果吾清咗啲date会有好多垃圾文件的，而且还会吾知有乜冲突，只不过建议最好清咗区，部机会顺好多。如果冇问题就ok，有问题就清吓啦。
    @cheuk5 I just did a restored back to 5.054 easily thanks to @benxiong. If you leave the 4 boxes checked, you'll not loose anything, it will restore all the apps and data that you have originally even KODO with all addons, NO NEED to re-install them.
    同意.所以我在回復安裝前先做回復出廠的步骤. B) :p

    Thanked by 1sarsinajar
  • Tvpad4Tvpad4 Junior Member
    Thank you padman!!! It work now :3 :3 :3
    Thanked by 1sarsinajar
  • laycrqlaycrq
    After following the steps from both of the youtube videos, I have successfully restored the TVPAD 4 to FW V5.054. After completing the setup of the network, the 3 advertisements on the front screen do not appear and the time does not update. Going into the TVpad Store, the apps do not load. I get a blank TVpad Store with no apps.

    I have checked the settings and did the network test. I get error code:-1

    IP Address, Gateway, DNS all gives me the green tick however on Server I get a Error Code: -1.

    I have tried settings with or without the DNS 158.132.187.187. Nothing works.

    Please help.

    Thanks
    Thanked by 1sarsinajar
  • pappypappy Member
    Make sure the ip,subnet,gateway numbers are the same in auto and manual settings
    Thanked by 1sarsinajar
  • laycrqlaycrq
    Confirmed numbers are the same, unfortunately still doesn't work
    Thanked by 1sarsinajar
  • padmanpadman Moderator
    @laycrq You are not in US, you shouldn't need 5.054
    Thanked by 1sarsinajar
  • laycrqlaycrq
    I used to get the 'restricted' message and wasn't able to use the tvpad at all even though I am based in AUS. Some of the websites recognise my IP is from the US.

    Any ideas why it isnt working for me?

    Thanks
    Thanked by 1sarsinajar
  • padmanpadman Moderator
    @laycrq Did you chargeback on your unit ?
    Thanked by 1sarsinajar
  • pappypappy Member
    Did you reinstall the apps via USB. Drive batch install?
    Thanked by 1sarsinajar
  • GeneraznXzGeneraznXz Member
    Just curious, the person in the video is using a MXQ Android box. How did he manage to pull up TWRP and install the firmware onto a non tvpad4 box?
    Thanked by 1sarsinajar
  • benxiongbenxiong
    Because tvpad is used the same chip of the MXQ.
    Thanked by 1sarsinajar
  • 535four535four Member
    edited February 2017
    Because tvpad is used the same chip of the MXQ.
    佢唔係跟據機本身MAC而定嗎？我也有一部MXQ pro, 是否也是一樣呀?
    Thanked by 1sarsinajar
  • benxiongbenxiong
    市面上有很多种不同的，MXQ就有很多种了，又什么MXV，M5C，好似未听过有MAC。
    Because tvpad is used the same chip of the MXQ.
    佢唔係跟據機本身MAC而定嗎？我也有一部MXQ pro, 是否也是一樣呀?
    Thanked by 1sarsinajar
  • benxiongbenxiong
    MXQ por =s905 or s905x chip, MXQ=S805 chip
    Thanked by 1sarsinajar
  • 535four535four Member
    市面上有很多种不同的，MXQ就有很多种了，又什么MXV，M5C，好似未听过有MAC。
    Because tvpad is used the same chip of the MXQ.
    佢唔係跟據機本身MAC而定嗎？我也有一部MXQ pro, 是否也是一樣呀?
    Sorry, 我說的MAC係指 盒子平身的 mac 地址 .
    Thanked by 1sarsinajar
  • benxiongbenxiong
    我盒子MAC是C4FAC338581
    Thanked by 1sarsinajar
  • 535four535four Member
    我是說就算你cloned 咗tvpad4在MXQ, 原因它有不同的M a c地址，它的app 也不能使用呀，可以嗎？
    Thanked by 1sarsinajar
  • ringokwan128ringokwan128 Junior Member
    I upgraded to 5.06 and now I desperately want to follow the instructions from the video to downgrade back to 5.054. The problem I am encountering, there is no reset button that I can visibly see on the TVPad 4, front, back, side, or top.

    Where is the reset button on the TVPad4?
    There is a tiny hole under bottom above of network connector!
    Sorry. I can't find the hole. Can you kindly take a picture and show to me? Thanks a lot.
    Thanked by 1sarsinajar
  • cheuk5cheuk5 Senior Member
    I upgraded to 5.06 and now I desperately want to follow the instructions from the video to downgrade back to 5.054. The problem I am encountering, there is no reset button that I can visibly see on the TVPad 4, front, back, side, or top.

    Where is the reset button on the TVPad4?
    There is a tiny hole under bottom above of network connector!
    Sorry. I can't find the hole. Can you kindly take a picture and show to me? Thanks a lot.
    Ok flip over your pad there is only one tiny pin hole you never missed
    Thanked by 1sarsinajar
  • tomato123tomato123 Show Producer
    he already said it can work. but the method to get it work cannot publish to the public.
    我是說就算你cloned 咗tvpad4在MXQ, 原因它有不同的M a c地址，它的app 也不能使用呀，可以嗎？
    Thanked by 2padman sarsinajar
Sign In or Register to comment.