UBOX Pro OS version i900 firmware
535four
Member
Upro i900 firmware in winrar formate:
https://mega.nz/#!4rw3TRyJ!PfzVaIqN-CQZJgHojazaEfh6JdQrssLsWqWl-LbBD1E
Phoenixcard v. 3.1.0 App:
https://mega.nz/#!87pW0KZB!XfpGfNHAncHz8E0GdnjhOUql4uPEpeE1D691qAcgY48
How to:
https://mega.nz/#!wrwyyQzD!yywXX1UbQLyYm8LX4BBBH9w3CtuwXjDqGq4p2o7tYQo
https://mega.nz/#!4rw3TRyJ!PfzVaIqN-CQZJgHojazaEfh6JdQrssLsWqWl-LbBD1E
Phoenixcard v. 3.1.0 App:
https://mega.nz/#!87pW0KZB!XfpGfNHAncHz8E0GdnjhOUql4uPEpeE1D691qAcgY48
How to:
https://mega.nz/#!wrwyyQzD!yywXX1UbQLyYm8LX4BBBH9w3CtuwXjDqGq4p2o7tYQo
Post edited by 535four on
Comments
got to find another alternative.
but it can't for this 2 new firmware.
its weird..
for the unzipped TW file size its 418785KB, after unzipping its 912808KB.
i jus tried it, but it still cant work.
FYI, I just ran one more tried on i900 and x900 with no issues.
C/P
Steps:
(Last resort, shouldn't be necessary): Perform complete card clean with Diskpart, as described below)
(Optional: Format SD Card using SD Card Formatter (if it says that Full Erase wasn't supported for your card and instead did Quick Format, don't worry))
Start PhoenixCard (version 3.10 on Pine64 Downloads page works)
Select correct drive letter and image
Select "Startup" method
Click Burn (not format to normal!)
Wait for error
Leave PhoenixCard running, and pull out the SD card from the computer (i pulled out the card from my reader, not the whole reader)
Wait for PhoenixCard to say "No devices found" or similar. Usually happens instantaneously. If nothing happens, start again at the top and try pulling the whole reader instead.
Push the card/reader back into the reader/PC
Select correct drive letter
Click burn.
This time it should perform the Burn process successfully. I personally had no luck whatsoever, tried multiple readers and images, but this worked on the first try. I tested it with the RemixOS image "pine64_B2016022702_1000MB_LAN.img". The OS started successfully on the Pine64+ 2 GB.
I am running Win10 64bit. I did not use any compatibility modes or something along those lines.
thks for trying to help.
the s800 firmware is so easy to burn... but this 900 n TW OS is a pain to deal with.
it can't jus be 2 people in this whole wide world that do this firmware upgrade thing.